Page 1 of 4 1 2 3 4 LastLast
Results 1 to 15 of 57

Thread: Dyno Run Data

  1. #1
    Slacker-Leave my user title alone Crawford's Avatar
    Join Date
    Mar 2002
    Location
    Carrollton, TX
    Posts
    1,465

    Dyno Run Data

    I would like to start a list of dyno run data. I dont think it should be a list of who has the highest numbers but I would like to see a sticky thread for data collection purposes where we can list mods, who's chip, what kind of program, before/after comparisons of mods, etc. I think this could be helpful in choosing mods for the trucks. I hope that collecting this data will be a great asset and I hope everyone participates.

    Thanks!
    Crawford Cooper
    NLOC #1039
    --Team WWFB--
    Gone but not forgotten:
    Black 2001 Lightning #6142
    Born on date: 8/13/01

  2. #2
    Slacker-Leave my user title alone Crawford's Avatar
    Join Date
    Mar 2002
    Location
    Carrollton, TX
    Posts
    1,465
    3-22-03

    JDM Filter kit
    Linemod (like it matters)
    #2 ASP lower
    Swanson Intake Oil "fix"
    Swanson Warm Street

    Peak: 377.9 rwhp / 458.2 rwtq
    Last edited by Silver_2000; 04-05-2003 at 11:46 AM.
    Crawford Cooper
    NLOC #1039
    --Team WWFB--
    Gone but not forgotten:
    Black 2001 Lightning #6142
    Born on date: 8/13/01

  3. #3
    Slacker-Leave my user title alone Crawford's Avatar
    Join Date
    Mar 2002
    Location
    Carrollton, TX
    Posts
    1,465
    3-22-03

    JDM Filter kit
    Linemod (like it matters)
    #2 ASP lower
    Swanson Intake Oil "fix"
    Swanson Cold Street

    2nd Dyno run of 3
    Peak: 375.9 rwhp / 456.2 rwtq
    Last edited by Silver_2000; 04-05-2003 at 11:45 AM.
    Crawford Cooper
    NLOC #1039
    --Team WWFB--
    Gone but not forgotten:
    Black 2001 Lightning #6142
    Born on date: 8/13/01

  4. #4
    Participating User
    Join Date
    May 2002
    Location
    TX
    Posts
    1,065

    Dyno Numbers

    See link below:
    http://www.talonclub.com/4images/det...image_id=2855&
    PSP 4-Way Chip
    4# lower
    75 shot wet NX

    Last edited by Silver_2000; 05-17-2003 at 02:49 PM.

  5. #5
    In the Garage Unplugged.. tliss's Avatar
    Join Date
    Mar 2002
    Location
    McKinney, TX
    Posts
    3,496
    I'll try to scan mine in and post them sometime over the weekend.

    Tom

  6. #6
    Webmaster - Torque Fan Silver_2000's Avatar
    Join Date
    Mar 2002
    Location
    Carrollton, Texas
    Posts
    14,181
    Bone Stock.

    All I did was air the tires up a little and add some 104 octane boost...


    My truck is described in fairly accurate detail here
    http://www.svtlightnings.com/svt/silverl/silverl.htm
    Last edited by Silver_2000; 03-26-2003 at 09:21 AM.

  7. #7
    Participating User microsuck's Avatar
    Join Date
    Jan 2003
    Location
    Richardson
    Posts
    1,355
    here is with my 2001 with...
    psp 4way chip
    psp 4# pulley
    denso it22's
    160 thermo
    Last edited by Silver_2000; 04-05-2003 at 11:09 AM.

  8. #8
    Participating User microsuck's Avatar
    Join Date
    Jan 2003
    Location
    Richardson
    Posts
    1,355
    here is with my 2001 with...
    psp 4way chip
    psp 4# pulley
    denso it22's
    160 thermo
    40hp wet shot
    Last edited by Silver_2000; 04-05-2003 at 11:09 AM.

  9. #9
    Participating User microsuck's Avatar
    Join Date
    Jan 2003
    Location
    Richardson
    Posts
    1,355
    Originally posted by Silver_2000_!
    Bone Stock.

    All I did was air the tires up a little and add some 104 octane boost...


    My truck is described in fairly accurate detail here
    http://www.svtlightnings.com/svt/silverl/silverl.htm
    I find it very hard to believe that a "bone stock" can make 402 rwhp!
    Andrew

  10. #10
    TALON Senior Member Sixpipes's Avatar
    Join Date
    Mar 2002
    Location
    Oak Point, TX
    Posts
    5,207

    JDM Chip, Pro-M 80mm MAF, 4# pulley, SVO throttle body, electric fan, a few other minor things.
    Last edited by Sixpipes; 04-05-2003 at 09:57 AM.

  11. #11
    TALON Senior Member Sixpipes's Avatar
    Join Date
    Mar 2002
    Location
    Oak Point, TX
    Posts
    5,207

    Swanson Chip, 90mm MAF, Swanson air kit, 4# pulley, SVO throttle body, electric fan, a few other minor things (3/22/03).
    Last edited by Sixpipes; 04-05-2003 at 10:26 AM.

  12. #12
    TALON Senior Member Sixpipes's Avatar
    Join Date
    Mar 2002
    Location
    Oak Point, TX
    Posts
    5,207


    Went to Hallsville the next day and ran a best ET of 12.737@110+ mph.
    Last edited by Sixpipes; 04-05-2003 at 10:23 AM.

  13. #13
    TALON Senior Member Sixpipes's Avatar
    Join Date
    Mar 2002
    Location
    Oak Point, TX
    Posts
    5,207

    Old dyno from Well's Racing showing an overlap with Silver_2000, Moonshine, & Sixpipes. Interesting to look at the gear changes and how it affects the Power vs. RPM. I don't remember the mods, but I do remember it was hot that day.

  14. #14
    Webmaster - Torque Fan Silver_2000's Avatar
    Join Date
    Mar 2002
    Location
    Carrollton, Texas
    Posts
    14,181
    Originally posted by Sixpipes

    Old dyno from Well's Racing showing an overlap with Silver_2000, Moonshine, & Sixpipes. Interesting to look at the gear changes and how it affects the Power vs. RPM. I don't remember the mods, but I do remember it was hot that day.
    April of 2000 I was making a whopping 328 hp... Woo Hooo

    Guys - You should save these dyno sheets in your Talon Photo galleries because I delete the attachments from the Forum database every 2 months or so...

    Using the attachment button is quick and easy BUT it is not permanent.

    PS- I have also negotiated with Steve from f150online to allow linking to His galleries here. So if you have pictures in an F150Online gallery you can link to them here and they will show up..
    Last edited by Silver_2000; 04-05-2003 at 11:49 AM.

  15. #15
    Participating User dboat's Avatar
    Join Date
    Dec 2002
    Location
    The Big D
    Posts
    9,840
    Originally posted by Silver_2000_!
    April of 2000 I was making a whopping 328 hp... Woo Hooo

    Guys - You should save these dyno sheets in your Talon Photo galleries because I delete the attachments from the Forum database every 2 months or so...

    Using the attachment button is quick and easy BUT it is not permanent.

    PS- I have also negotiated with Steve from f150online to allow linking to His galleries here. So if you have pictures in an F150Online gallery you can link to them here and they will show up..
    Well you better give Terry a call, PM, email, whatever to let him know so he'll quit griping about this one... he he
    Dana

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •