Page 1 of 2 1 2 LastLast
Results 1 to 15 of 105

Thread: Project Dirty Dog

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Participating User FRDRCING's Avatar
    Join Date
    Dec 2003
    Location
    Olathe Ks.
    Posts
    1,803

    Project Dirty Dog

    I sold my White 00 Truck a few months back and have been working on a Project truck ever since. I picked up a black 93 Lightning that needs a lot of work. I picked up the truck from the second owner who has had it for most of it's life. Truck had a tree fall on it while parked in there driveway and did some good damage. Dented up the hood,broke out part of the rear window,put some other dents on the body as well. Truck was very dirty and stunk when I picked it up. The rear tube bumper was shot as you will see in the pictures. But I have done a lot so far since I got it 6 months ago.

    New Battery
    New Alternator
    New Headlight Bulbs
    New Wiper Motor
    New Wiper Blades
    New Battery Tray
    New A/C vents
    New Door sills
    Pulled and Cleaned the Carpet(Lots of Broken Glass was found)
    Pulled out all the stereo wires they left that were junk
    Fixed the door speakers
    Pulled the Wind Guards off
    Pulled off the Rusted out U-HAUL Tow hitch off
    Pulled off the Rusted out Tube Bumper
    New Tag lights
    New Solid Rear Window
    Fixed the Tank selector switch
    New Ignition Switch and key switch
    Cut up the stock Warped Plastic Bed Liner
    Got all new Tires
    New Bearings and Seals on the fronts
    Painted the Rear end with some high heat black.
    Cleaned the motor
    Oil Change
    New Front shocks(need to get the rears on)
    New Plugs and Wires
    New Cup holders for the Console
    Fixed Broken wheel stud
    New Drivers Side Seat tilt lever
    New Hood(Needs hood pin holes fixed.)
    Gen 2 Dome light

    I can't think of what else has been done, I'm sure I have forgot a few things. I do have a roll pan here for the truck and a lot of new interior Trim parts to be here on Thursday. With LMC truck just a few mins. up the street, its not that hard to get parts I need that I can't get. I have a lead on another bed that has no rust and is in primer condition. So that will save a lot of time on my end on body work and money as well. Now for some Pictures from when I picked it up till now.













  2. #2
    Participating User FRDRCING's Avatar
    Join Date
    Dec 2003
    Location
    Olathe Ks.
    Posts
    1,803








  3. #3
    Am I wrong 99WhiteBeast's Avatar
    Join Date
    Mar 2002
    Location
    Arlington
    Posts
    4,142
    Nice job Tyson- making progress!

    That license plate frame for the rear tube is worth about a $100- there was some one hunting one on NLOC a few weeks back.

  4. #4
    Participating User FRDRCING's Avatar
    Join Date
    Dec 2003
    Location
    Olathe Ks.
    Posts
    1,803
    Quote Originally Posted by 99WhiteBeast View Post
    Nice job Tyson- making progress!

    That license plate frame for the rear tube is worth about a $100- there was some one hunting one on NLOC a few weeks back.
    That plate frame was being held onto the bumper by two wires. I would of saved it if was still usable. It's hard to see in the picture but it was cracked on the lower right corner.

  5. #5
    Participating User Shiner1's Avatar
    Join Date
    Feb 2003
    Location
    Lewisville
    Posts
    2,204
    Thanks for posting that up Tyson. Keep up the good work.
    95 - G1
    Blown, Stroked & Juiced

  6. #6
    Participating User FRDRCING's Avatar
    Join Date
    Dec 2003
    Location
    Olathe Ks.
    Posts
    1,803
    Got a lot of interior trim parts in today. Only one piece was broke, but may be fixable with a little bit of glue on the back side. If not, I know were one is at I can pick up. Just need to get a few case's of Paint,some sand Paper to start working on these parts.








  7. #7
    Participating User
    Join Date
    Jul 2007
    Location
    Texas
    Posts
    16
    I always see Lightnings that are shining and new looking. I feel like I am the only guy with one that needs work. Looking at the pics of your '93 I know better now. We are both working towards restoration and Turbo's. We can race to see who will finish first. I think I will have mine done by the fall of 2017...LoL... and if not.. then 2027 for sure.
    Hopefully you will not have any detours and you can Get-R-Done.
    You have more to do to yours than I do. I can't wait to see your progress.

    Richard

  8. #8
    Participating User FRDRCING's Avatar
    Join Date
    Dec 2003
    Location
    Olathe Ks.
    Posts
    1,803
    Got a new windshield going in monday. Then the dash can go back in.


    Sent from my iPhone using Tapatalk
    93 Ford Lightning #1618
    AKA Project Dirty Dog
    99 Ford Explorer AWD 5.0 Power Plant

    RIP Maggie Moo Moo

  9. #9
    Participating User FRDRCING's Avatar
    Join Date
    Dec 2003
    Location
    Olathe Ks.
    Posts
    1,803
    Found a good deal on a set of Bassani Headers so we got them on this week. Hope we can finally get the dash in this week.


    Sent from my iPhone using Tapatalk
    93 Ford Lightning #1618
    AKA Project Dirty Dog
    99 Ford Explorer AWD 5.0 Power Plant

    RIP Maggie Moo Moo

  10. #10
    Participating User FRDRCING's Avatar
    Join Date
    Dec 2003
    Location
    Olathe Ks.
    Posts
    1,803
    Well its been a while since I have posted in here. We have got a lot done. The cab and Bed has been off for almost three months or so. The motor and trans have been pulled. We sent the frame out to be powdercoated alkng with all cab mounting brackets,coil springs,radius arms,shock towers,radius arm brackets,leaf spring brackets and a few other things. I will get some pictures uploaded in a few mins.


    Sent from my iPhone using Tapatalk
    93 Ford Lightning #1618
    AKA Project Dirty Dog
    99 Ford Explorer AWD 5.0 Power Plant

    RIP Maggie Moo Moo

  11. #11
    Participating User FRDRCING's Avatar
    Join Date
    Dec 2003
    Location
    Olathe Ks.
    Posts
    1,803





  12. #12
    Participating User dboat's Avatar
    Join Date
    Dec 2002
    Location
    The Big D
    Posts
    9,840
    Wow, that looks really nice..

    Dana

  13. #13
    TALON Supporting Member Flats Man's Avatar
    Join Date
    Mar 2002
    Location
    Indian Rocks Beach, Fl
    Posts
    1,120
    Really nice work! I didn't know that you were going this far with this project! I didn't know it was going frame off. Keep the updates and pictures coming.....

  14. #14
    Webmaster - Torque Fan Silver_2000's Avatar
    Join Date
    Mar 2002
    Location
    Carrollton, Texas
    Posts
    14,181
    Cool

  15. #15
    Participating User FRDRCING's Avatar
    Join Date
    Dec 2003
    Location
    Olathe Ks.
    Posts
    1,803



    Sent from my iPhone using Tapatalk
    93 Ford Lightning #1618
    AKA Project Dirty Dog
    99 Ford Explorer AWD 5.0 Power Plant

    RIP Maggie Moo Moo

Thread Information

Users Browsing this Thread

There are currently 5 users browsing this thread. (0 members and 5 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •