PUMP
03-03-2012, 01:25 AM
For any of the L guys who are woodworkers or wannbe woodworkers I have the following listed on Craigslist, but will give a special deal to my Lightning Bros.
This system is used but well maintained and in complete serviceable condition.
Shopsmith Mark V Model 510 includes:
1-1/8 HP Headstock
Main Work Table (1-1/4”W x 22”D) with 2 Miter gauge slots accepts T-nut mounted fixtures
1 - Rigid Extension Table (7-3/8”W x 22”D)
2 – Floating Extension Tables (7-3/8”W x 22”D)
4 – 27” Extension Table Connecting Tubes
2- Telescoping Floating Extension Table Support Legs – Twist Lock adjustable hieght
Maximum Support Surface Size – End to end 102”w x 22”D
Maximum Ripping capacity - 98”
Lower Guard with Sanding Disc Dust Collection
See-Through Upper Saw Guard with Riving Knife
Rip Fence - Knob + Lever Locking, Top T-Slot
Miter Gauge with T-Slot Washer
Dual Position Lathe Tool Rest
Owners Manual (includes Setup, Maintenance and Operating Instructions as well as a self study course to learn how to use all of the various modes)
The following accessories are also included:
Retractable Casters (for easy mobility)
Power Coupler Kit for attaching Special Purpose Tools (SPT)
12” Steel Sanding Disc
1-1/4” Saw Blade Arbor
10” Carbide Tipped Combination Blade
15 – Pressure Sensitive garnet sandpaper discs (assorted grits)
Disc Sander Table Insert
½” Drill chuck and Key
Multi-Purpose Drill Press/Bench Vise with quick release jaws - 4" jaw opining.
Tapered Screw Arbor to hold buffing wheel
Lathe Cup Center – (supports non-driven end of spindle)
Lathe Center Drive
4” Straight Lathe Tool Rest (for smaller turning jobs)
S – Shaped Tool Rest (lets you reach up to 4” deep into a bowl)
90-degree Tool Rest (for faceplate turnings)
3-3/4” Lathe Faceplate (provides wobble-free support for turning bowls
Saw Safety Kit – includes Push Stick, Push Block, Featherboard and Fence Straddler
The system and components described is offered for $400.00 delivered (within a 10-mile radius) and setup. I will also assist in final alignment/adjustment (if desired and requested prior to delivery)
Additional delivery charge of $0.90 for each 1-mile increase in distance above 10-miles.
I also have the following accessories that are offered for sale:
A 7-piece Lathe Tool set consisting of: Parting Tool, 3/8” Gouge Chisel, 1/2” Roundnose Chisel, 1” Gouge Chisel, 1” Skew Chisel, 1/4” Bedan (the foregoing 6 are Shopsmith Brand), and a Robert Sorby model 834H 3/8” Bedan. Price for all 7 is $50.00
A Molder/Shaper – Dado package consisting of: 5/8” Molder/Dado Arbor, 6-1/2" Carbide Tipped Adjustable Dado, Molder Table Insert, Molder Head and 4-sets of molder knives. Price for the package
is $75.00.
This system is used but well maintained and in complete serviceable condition.
Shopsmith Mark V Model 510 includes:
1-1/8 HP Headstock
Main Work Table (1-1/4”W x 22”D) with 2 Miter gauge slots accepts T-nut mounted fixtures
1 - Rigid Extension Table (7-3/8”W x 22”D)
2 – Floating Extension Tables (7-3/8”W x 22”D)
4 – 27” Extension Table Connecting Tubes
2- Telescoping Floating Extension Table Support Legs – Twist Lock adjustable hieght
Maximum Support Surface Size – End to end 102”w x 22”D
Maximum Ripping capacity - 98”
Lower Guard with Sanding Disc Dust Collection
See-Through Upper Saw Guard with Riving Knife
Rip Fence - Knob + Lever Locking, Top T-Slot
Miter Gauge with T-Slot Washer
Dual Position Lathe Tool Rest
Owners Manual (includes Setup, Maintenance and Operating Instructions as well as a self study course to learn how to use all of the various modes)
The following accessories are also included:
Retractable Casters (for easy mobility)
Power Coupler Kit for attaching Special Purpose Tools (SPT)
12” Steel Sanding Disc
1-1/4” Saw Blade Arbor
10” Carbide Tipped Combination Blade
15 – Pressure Sensitive garnet sandpaper discs (assorted grits)
Disc Sander Table Insert
½” Drill chuck and Key
Multi-Purpose Drill Press/Bench Vise with quick release jaws - 4" jaw opining.
Tapered Screw Arbor to hold buffing wheel
Lathe Cup Center – (supports non-driven end of spindle)
Lathe Center Drive
4” Straight Lathe Tool Rest (for smaller turning jobs)
S – Shaped Tool Rest (lets you reach up to 4” deep into a bowl)
90-degree Tool Rest (for faceplate turnings)
3-3/4” Lathe Faceplate (provides wobble-free support for turning bowls
Saw Safety Kit – includes Push Stick, Push Block, Featherboard and Fence Straddler
The system and components described is offered for $400.00 delivered (within a 10-mile radius) and setup. I will also assist in final alignment/adjustment (if desired and requested prior to delivery)
Additional delivery charge of $0.90 for each 1-mile increase in distance above 10-miles.
I also have the following accessories that are offered for sale:
A 7-piece Lathe Tool set consisting of: Parting Tool, 3/8” Gouge Chisel, 1/2” Roundnose Chisel, 1” Gouge Chisel, 1” Skew Chisel, 1/4” Bedan (the foregoing 6 are Shopsmith Brand), and a Robert Sorby model 834H 3/8” Bedan. Price for all 7 is $50.00
A Molder/Shaper – Dado package consisting of: 5/8” Molder/Dado Arbor, 6-1/2" Carbide Tipped Adjustable Dado, Molder Table Insert, Molder Head and 4-sets of molder knives. Price for the package
is $75.00.