WTS raceline wheels LEGEND SERIES-TELSTAR

[svtroky]

I have a set of centerline LEGEND SERIES-TELSTAR 5 lug, back tires are MT and on the front ones are skinnes they came off a cobra i have the adapters to put them on a lightning 2

700 for the rims/tires and adapters.

i need the money so let me know.
817-965-0720 call or txt will be fine.

Thanks.
Memo.

[tiffo60]

need some pics to get any interest:tu:

[svtroky]

need some pics to get any interesthttp://www.talonclub.com/forum/images/smilies/thumbsup.gif

ok ill get them tonight

Thanks.

[nacklas]

I have seen these wheels they are pretty nice!! Wish I had the $$$$!

[In2deep]

i have seen these wheels they are pretty nice!! Wish i had the $$$$!


+1

[99WhiteBeast]

sizes, lug pattern, specs........

[In2deep]

Steve, did not see ya at ennis!!

[svtroky]

rear are 15x10 the ones in the front are 15x8 or 15x7 like I said there skinnes on the front and the bolt pattern is 4.50 but I have the adapters to fit the lightning and 5 lug chevis.

[N2Otorious]

rear are 15x10 the ones in the front are 15x8 or 15x7 like I said there skinnes on the front and the bolt pattern is 4.50 but I have the adapters to fit the lightning and 5 lug chevis.

using the adapters, do you have to grind the brake claipers and shields to get 15" wheels on? What adapters are these?

[svtroky]

30153016

Back rims didnt have time to look for the skinnes inthe morning sorry but here yawl go if i have to get a pick of the front tires i will tonight.


using the adapters, do you have to grind the brake claipers and shields to get 15" wheels on? What adapters are these?

only onthe back ones inthe front by using the adapters its like having a spacer.

i have the spacers for the front if some one buy's them for a 4.50 bolt pattern.

[ThunderBolt]

Fellas, Centerline can make all Sundance and Legend series wheels in our bolt pattern. This includes The Telstar. I've done my research on these wheels. The barrel on Centerline's 15" wheel is too small. It's actually 1" smaller than Bogarts. The ID measurement on a CL wheel is 13.5" VS 14.5 on the Bogart. There's no way these will work on the rear.

http://centerlinewheels.com/sub_wheel.php?mw_id=35

[svtroky]

Fellas, Centerline can make all Sundance and Legend series wheels in our bolt pattern. This includes The Telstar. I've done my research on these wheels. The barrel on Centerline's 15" wheel is too small. It's actually 1" smaller than Bogarts. The ID measurement on a CL wheel is 13.5" VS 14.5 on the Bogart. There's no way these will work on the rear.

http://centerlinewheels.com/sub_wheel.php?mw_id=35 (http://centerlinewheels.com/sub_wheel.php?mw_id=35)

I hope u dont take it the wrong way but.
I can prove u wrong that they will fit the lightning I had this same wheels on my truck on May1 and some guys can tell u that they saw them on my truck and I don't know if they make them for are bolt pattern but I did posted that were from a cobra with a 4.50 bolt pattern

Oh and i did my research to and the bigges bolt pattern and the Legend siries i didnt see a 135mm bolt pattern but the SUNDANCE SERIES-MATRIX they do make some 135mm(5.3149) that's the Gen2 bolt pattern.:D:tu::D

[ThunderBolt]

Not at all. I'm going off the info I got from Centerline. They told me the Barrel ID measurement is 13.5" I suppose the rep I talked to could be wrong. In a way that is great news because I really want 15" wheels.

[ThunderBolt]

Oh and i did my research to and the bigges bolt pattern and the Legend siries i didnt see a 135mm bolt pattern but the SUNDANCE SERIES-MATRIX they do make some 135mm(5.3149) that's the Gen2 bolt pattern.:D:tu::D


I know, I have a set of 17" Matrix 5's on order since my Qualifiers from the Competition series failed the load test.

[svtroky]

Not at all. I'm going off the info I got from Centerline. They told me the Barrel ID measurement is 13.5" I suppose the rep I talked to could be wrong. In a way that is great news because I really want 15" wheels.
knana
Theres a set for sale in talonclub.com call 817-965-0720 get $700 on ur hand and there yours oh and with tires can get better then this :D:beer:

[In2deep]

He ran these may 1 Ron no problems going down the track..

[ThunderBolt]

I'm going with custom back spacing to run some monster tires. Not to mention I already have the tires. I'm also going to run 17X7 wheels up front.

Thanks for the offer though. BTW, do you have a picture of those wheels on your truck?

[svtroky]

No on the pic. but if they dont sale ill have them so when i go to the track and play again.

[ThunderBolt]

He ran these may 1 Ron no problems going down the track..

I'm sure his backspacing won't work. Since he's running spacer adapters the wheels would have to have at least 7.5" back spacing. Besides my set will be suitable for fulltime duty. I'd rather not run a spacer adapter for that application.

[svtroky]

I'm sure his backspacing won't work. Since he's running spacer adapters the wheels would have to have at least 7.5" back spacing. Besides my set will be suitable for fulltime duty. I'd rather not run a spacer adapter for that application.

Smart man.

[ThunderBolt]

Seems like a good set-up for the money though.

[ThunderBolt]

Luis over at Centerline swears up and down thar the Barrel ID is 13.5. He tells me you had to do more than grind the calipers. Oh well screw it. I'll run the 17's for a while.

[svtroky]

Luis over at Centerline swears up and down thar the Barrel ID is 13.5. He tells me you had to do more than grind the calipers. Oh well screw it. I'll run the 17's for a while.

Well i did grinding and the sheet metal i thing its a dust cover i cut the lip off it to get them in there.

[ThunderBolt]

Well i did grinding and the sheet metal i thing its a dust cover i cut the lip off it to get them in there.

It sounds like the standard grinding for the Bogarts.