PDA

View Full Version : 2.8" upper? 6lb one piece lower?



L-Fever
03-23-2006, 02:30 PM
Anyone, have these laying around?

99WhiteBeast
03-23-2006, 03:27 PM
Are you doing some kind of experiment? I thought Jeff's truck was the lab rat of the bunch:cool:

L-Fever
03-23-2006, 03:37 PM
Are you doing some kind of experiment? I thought Jeff's truck was the lab rat of the bunch:cool:
:rll::rll:

I have a very short attention span!

PoorSvtman
03-23-2006, 05:19 PM
Ive been running a 6lb and a 2.8 upper for awhile.. IF your just wanting to play around i have a interchangable 6lb you can borrow.. I dont want to take my 2.8 off my snout...


Also have the puller for the upper pulleys

L8 APEX
03-23-2006, 05:29 PM
I have a 2.80 interch upper $130 I think. Intch 6# lowers 210 w/ belt.

L-Fever
03-23-2006, 07:21 PM
Ive been running a 6lb and a 2.8 upper for awhile.. IF your just wanting to play around i have a interchangable 6lb you can borrow.. I dont want to take my 2.8 off my snout...


Also have the puller for the upper pulleys

Thanks for the offer Mike, I just bought one of those pully puller's myself. I'm thinking about adding a little more boost after I make some other changes. I'll keep your offer in mind.

PoorSvtman
03-23-2006, 09:12 PM
you knew i had the puller.. lol you could have used it when ever.. Heck i just got it back from a guy in ark....

umclightning
03-23-2006, 09:12 PM
[quote=PoorSvtman]Ive been running a 6lb and a 2.8 upper for awhile.. IF your just wanting to play around i have a interchangable 6lb you can borrow.. I dont want to take my 2.8 off my snout...

How many miles does ur truck have. I am scared to run that combo
have a 4 and 6# bought the 6# first but am scared to install on my
80k motor.

PoorSvtman
03-23-2006, 09:19 PM
i pushed my truck realy hard up to 115k miles.....I did alot of the highway pulls and such that most here will warn you about... and ended up with a lifted head....

I decided to pull the motor and rebuild it instead of pulling it and fixing the lifted head,head gasket and replacing it with arp head studs.. I told my self if i had to pull the motor just to do that then i was just going to rebuild it...

Im currently almost done with it... Also i see your from ftworth, where about?

umclightning
03-23-2006, 09:38 PM
Im currently almost done with it... Also i see your from ftworth, where about?[/quote]
I live in the north side. Y is it bad to do freeway pulls.

L-Fever
03-23-2006, 09:42 PM
you knew i had the puller.. lol you could have used it when ever.. Heck i just got it back from a guy in ark....

You can't have too many cool tools man!:cool:

PoorSvtman
03-23-2006, 09:54 PM
true im about to spend 80 bucks on a tool that ill use only twice.. valve spring compressor tool/dohicky...

My truck is almost done, just a month or so left.so if you want to play with the 6lb let me know.. I dont work this weekend. Ill be out in north richland hills saturday i think.. dunno if thats buy u

PoorSvtman
03-23-2006, 09:56 PM
I live in the north side. Y is it bad to do freeway pulls.


overdrive, boost and high rpms tend to make the motor go BOOM....

Ive probly seen you around.. ive seen a few red Ls over that way during the day...

umclightning
03-23-2006, 10:01 PM
overdrive, boost and high rpms tend to make the motor go BOOM....

Ive probly seen you around.. ive seen a few red Ls over that way during the day...
I have the only one with black rims

PoorSvtman
03-23-2006, 10:04 PM
i wouldnt say that but i think the previous owner of your L was a member here.. YOu ever go out to kennedale?

L-Fever
03-23-2006, 10:07 PM
true im about to spend 80 bucks on a tool that ill use only twice.. valve spring compressor tool/dohicky...

My truck is almost done, just a month or so left.so if you want to play with the 6lb let me know.. I dont work this weekend. Ill be out in north richland hills saturday i think.. dunno if thats buy u

No rush, I'll probably just look for a 2.8 upper for now. You truck will should be a beast when your done! Thanks!
I live between Lewsiville and Frisco, btw.

umclightning
03-23-2006, 10:14 PM
i wouldnt say that but i think the previous owner of your L was a member here.. YOu ever go out to kennedale?
I meant in the north side of fort worth

umclightning
03-23-2006, 10:16 PM
i wouldnt say that but i think the previous owner of your L was a member here.. YOu ever go out to kennedale?
Yeah ive been out their a few times

PoorSvtman
03-23-2006, 10:21 PM
yea ive talked to you before then....

umclightning
03-23-2006, 10:23 PM
yea ive talked to you before then....
Really dont remember

L-Fever
03-27-2006, 04:03 PM
Anyone have a stock uppper?

PoorSvtman
03-27-2006, 05:38 PM
i have a stock upper that has all the black stripped off...

L-Fever
03-27-2006, 06:54 PM
i have a stock upper that has all the black stripped off...

That's perfect, I'm going to try to get it anodized (red) to match my idlers.

PoorSvtman
03-27-2006, 08:19 PM
sounds good...just let me know when you want it and we can work something out:tu:

L-Fever
05-22-2006, 01:39 PM
Still looking for a 2.8" upper w/hub or 1 piece,5# or 6# one piece lower......

Tex Arcana
05-23-2006, 12:23 AM
:rll::rll:

I have a very short attention span!
*BLINK!* Whaaaaat??? :tongue: