PDA

View Full Version : In-line fuel pump



Sixpipes
01-22-2006, 08:16 PM
Added a little in-line pump to the Gen I project truck.

http://www.svtgalleries.net/gallery/data/500/medium/bracket1.JPG

http://www.svtgalleries.net/gallery/data/500/medium/bracket2.JPG

http://www.svtgalleries.net/gallery/data/500/medium/bracket3.JPG

Not real happy with the coiled fuel line, but there just isn't any room on the frame rail to fit everything in. :cool:

Flats Man
01-22-2006, 08:36 PM
Looks good Dennis! I don't think that coil will hurt you at all with the numbers you are shooting for! Did you upgrade the intank or is it still stock?
I am going to be removing my front tank very soon!

L8 APEX
01-22-2006, 09:42 PM
Just watch the line for fatigue failure. They make a blue colored line for fuel systems that is good rubber.

99WhiteBeast
01-23-2006, 11:59 AM
Looks like that will make the fuel filter change easier- just unbolt the bracket and drop it down to change.

Did you fab the bracket or did you buy it?

Chris94L
01-23-2006, 06:48 PM
Is it not mounted backwards? Don't the electrical connections goto the suction side of the pump?

Sixpipes
01-29-2006, 01:21 PM
I made the bracket out of 4" angle and it works pretty well. The pump terminals are on the discharge side so the installation is correct. Most of the fuel pumps I have seen do have the terminals on the suction side, but this one has the direction engraved on the pump housing so I know it is installed properly. :cool: